home *** CD-ROM | disk | FTP | other *** search
- <printer id="printer/HP-LaserJet_1100A">
- <make>HP</make>
- <model>LaserJet 1100A</model>
- <mechanism>
- <laser/><!--not "color"-->
- <resolution>
- <dpi>
- <x>600</x>
- <y>600</y>
- </dpi>
- </resolution>
- <consumables>
- <comments>
- <en>HP UltraPrecise toner cartridge</en>
- </comments>
- <!--one or more "partno" elements.--></consumables>
- </mechanism>
- <url>http://www.hp.com/cposupport/eschome.html</url>
- <lang>
- <pcl level="5e"/>
- <pjl/>
- <text>
- <charset>us-ascii</charset>
- </text>
- </lang>
- <autodetect>
- <general>
- <ieee1284>MFG:Hewlett-Packard;MDL:HP LaserJet 1100;DES:HP LaserJet 1100A Printer-Copier-Scanner;CMD:MLC,MFPDTF1,PCL,PJL;CLS:PRINTER;</ieee1284>
- <manufacturer>Hewlett-Packard</manufacturer>
- <model>HP LaserJet 1100</model>
- <description>HP LaserJet 1100A Printer-Copier-Scanner</description>
- <commandset>MLC,MFPDTF1,PCL,PJL</commandset>
- </general>
- </autodetect>
- <functionality>A</functionality>
- <driver>hpijs</driver>
- <comments>
- <en>
-
- Same as the 1100 with a copier/scanner. "ljet4" yields
- much better prints than "lj4dith", HPIJS gives probably
- the best results.<p>
-
- For basic printing functionality use the <a href="
- http://hplipopensource.com/">HPIJS driver</a>. For
- advanced functionality such as printer status, maintenance
- features, scanning and photo card unload use the <a href="
- http://hplipopensource.com/">HPLIP driver</a> (which
- includes HPIJS). <p>
-
- Stand-alone copying should just work, it does not need the
- PC.<p>
-
- Unfortunately, this printer has a little hardware problem: The
- paper separation pad hardens with the time and the printer pulls
- in several sheets of paper at once. HP is aware of this and
- offered a kit to fix this without needing to disassemble the
- printer for free. Unfortunately, HP discontinued this kit. You can
- perhaps get these kits from other suppliers online for around 10
- USD.<p>
-
- The HP LaserJet 1100 has the same engine as the Canon LBP-320,
- LBP-320 PRO, and LBP-350, and these have the same hardware
- problem. It is quite feasible to solve this by gluing a 0.5mm
- rubber strip over the hardened grey separation pad.<p>
-
- </en>
- </comments>
- </printer>
-
-
-